Zundapp 517 Cylinder & Crankshaft

• 50CC Cylinder for Zundapp.
• Model Minitherm
• Brand Athena.
• Complete with piston and gasket set
• Diameter Exhaust port 32MM.
• Center distance manifold mounting 46MM

• Piston ring Zundapp
• 39MM X 1.5 B
• For various 50cc Zundapp Piston

• Piston pin clips
• 2 Pieces
• Fits on a 12MM Piston pin

Base gasket BAC

• Zundapp 4-5V
• 1.0MM

Identical to Zundapp article number
Z276-02 219

Base gasket

• Zundapp 4-5G
• 0.80MM

Identical to Zundapp article number
Z276-02 219

• Head gasket
  
• Zundapp
• For standard & 50CC Cylinders
• 0.10mm / BAC

Head gasket Zundapp 50CC / 39MM

0.40MM.

• Intake gasket
• Zundapp 4/5 Gears

• Washer
• M7
• Galvanized
• Din 125A

• Nut M7X1
• Galvanized
• Din 934

• Nut M7 increased
• Use for cylinder stud
• A Piece
• Gilera Citta
• Vespa Ciao / SI / Bravo
• Zundapp
• Tomos

• Collar nut M7 ( Stud )
• A piece
• Gilera Citt
• Vespa Ciao
• Zundapp
• Tomos

• Crankshaft
• Zundapp 3/4 Gears
• Including needle bearing ( For P12 piston)
• Connection rod length 91MM
• Top Racing
• Note, additional info;
• From about 1969/1970 Zundapp has implemented its engine blocks with a 91MM connecting rod. Before this an 85MM connecting rod was used, which can be recognized by the pistons with a low pin. This product is the crankshaft with the 91MM connecting rod.

• Crankshaft full round
• Zundapp 3 & 4 Gears
• Rito
• Including needle bearing ( For P12 piston)
• Connecting rod 91MM
  
  
• Note, additional info;
  From around 1969/1970 Zundapp has implemented all its engine blocks with a 91MM connecting rod. Before this an 85MM connecting rod was used, which can be recognized by the pistons with a low pin. This product concerns the crankshaft with the 91MM connecting rod.

• Crankshaft
• Zundapp 3/4 Gears
• Including needle bearing (for P12 piston)
• Connection rod length 91MM
• Silver cage
  
  
• Note, additional info;
  From around 1969/1970 Zundapp has implemented all its engine blocks with a 91MM connecting rod. Before this an 85MM connecting rod was used, which can be recognized by the pistons with a low pin. This product concerns the crankshaft with the 91MM connecting rod.

• Crankshaft
• Zundapp 3 & 4 Gears
• Rito Race
• Including needle bearing ( For Pin 12 piston )
• Connection rod length 91MM
• Runs till 19,000 RPM
  
  
• Note, additional info;
  From around 1969/1970 Zundapp has implemented all its engine blocks with a 91MM connecting rod. Before this an 85MM connecting rod was used, which can be recognized by the pistons with a low pin. This product concerns the crankshaft with the 91MM connecting rod.
  
  

Shimring Crankshaft Left.
Zundapp

17X24X0.20MM

Shimring Crankshaft Left.
Zundapp

17X24X1.0MM

Shimring Crankshaft Zundapp

• Left
• Size 17X24X0.10MM

Shimring Crankshaft Zundapp Right.

• 15.1 X 21 X 1.0MM

Shimring Crankshaft Zundapp Right.

• 15.1 X 21 X 0.2MM

Shimring Crankshaft Zundapp Right.

• 15.1 X 21 X 0.3MM

• Needle bearing
• 12x15x15MM
  
  Fits on:
• Zundapp 3/4 Gears
• Puch Maxi
• Vespa models with piston pin 12
  
  

• Woodruff / Flywheel key
• Kreidler
• Zundapp
• Puch
  
  
• See images for sizes
  
  

Identical to Kreidler article number
00.80.01

Identical to Zundapp article number
DIN6888-300